Shadowfoil Props
MHSv1 1.15in ID Chassis STL Files
Couldn't load pickup availability
This is a custom designed chassis compatible with MHSv1 builds with ID=29mm (1.15in). The neopixel holder is designed to match the dimensions of the The Custom Saber Shop's MHSv1 LED heatsinks, as such it will fit perfectly and lock between an emitter piece and the first body piece.
Strongly recommend adjusting CLASH_THRESHOLD to 3.0 or greater for the no crystal variant, the small size of this chassis can cause false clash from speaker vibration.
STL = printable files, not a physical item
Installed photos are for reference only, this listing is for a digital file and not an installed chassis.
Crystal Chamber variant requires 4x 3mm OD, 0.5mm wall x 48mm Brass Tubes (speaker/crystal chamber led wires run through these tubes)
Recommend printing with tree supports enabled in Cura, 0.2mm layer thickness. Orient the neopixel holder downward. Crystal chamber accents are fragile, handle with care. Print 6x fins, 1x Chassis, 1x Speaker Section
Features:
- Neopixel accent slots
- Press fit slots for CFX, Proffie, GHv3, NPXL connectors
- Kill switch slot
- Slot for optional ShtokCustomWorx BT909 chip
Compatible Parts:
- The Custom Saber Shop MHSv1 parts
- CFX (Proffie v2.2, GHv3 with adapters)
- ShtokCustomWorx NPXL Long Pin Hilt Side Connector
- 18650 Protected Cell Li-Ion Battery
- 28mm Bass Speaker
- 500ASSP1M2RE SPDT Kill Switch
- WS21812b 5050 Neopixel Accents
- ShtokCustomWorx BT909
- Brass Low Profile Tactile Switches
- Keystone battery contacts
Dimensions (Crystal Chamber Variant)
- Emitter: 27.90mm OD x 17mm (1.1in OD x 0.67in)
- Emitter Lip: 33.275mm OD x 3.30mm (1.31in OD x 0.13in)
- Main Body: 29mm OD x 179mm (1.15in OD x 7.05in)
Dimensions (No Crystal Chamber Variant):
- Emitter: 27.90mm OD x 17mm (1.1in OD x 0.67in)
- Emitter Lip: 33.275mm OD x 3.30mm (1.31in OD x 0.13in)
- Main Body: 29mm OD x 128mm (1.15in OD x 5in)
Share














